A 100% Employee Owned Company


Fastener Solutions
Fastener Solutions
You Are Here: Product Detail

Wafer, Type A Head - Vector™ - #2 Phillips

Product 220 Wafer Head Streaker Technical Data
Product PS120 Wafer Head Streaker Technical Data
31V Wafer Head Vector Screws (PS120) Submittal Form
Wafer Head Streaker® Screws (220) Submittal Form
SDS - Fasteners - Effective September 2019 - August 2024 SD
Vector 31V Literature
Bulk Box 5lb Box 1lb Box
Item No. Description      
31V 7 x 9/16-in, Wafer Head, Vector™ Point, Streaker®, Phosphate, Bulk (Approx. Pcs. 10,000)
Grabber's new Vector screw significantly reduces drive time and increases productivity with its much sharper and steeper-angled point compared to traditional framing fasteners. Competitive tests have demonstrated that Vector point screws drive up to eight times faster than IFI SAE J78 fastener penetration standards and 50% faster than competing fasteners. In a drive comparison with standard framing fasteners, the VectorTM performed considerably better across the board in multiple drive test comparisons.

Designed specifically for metal framing, the Vector™ fastener drives through light-gauge metal with ease. Competitive tests compared the Vector™ screw against 9 other fasteners through two layers of 25-gauge metal—and the results were dramatic. The Vector™ screw performs eight times faster than IFI SAE J78 penetration standards—and 50% faster than the average time for other fasteners.

Gauge:                #7
Length:               9/16"
Head Type:          Wafer Head
Recess Type:       #2 Phillips
Thread Type:        Twin lead
Coating:              Gray phosphate
Point:                  Vector Point

Installation Guidelines:
Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and RPM range of 0 to 4,000.
  • The wafer head is fully seated when the head is flush with the work surface.
  • Overdriving my result in fastener failure or strip out.
  • The fastener must penetrate beyond the metal three full thread pitches.

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved.